Well, I finally got a little done. One of my novice mistakes was to make a bannana fuse. The tail was about 1/8" off to one side! I decided to hack the tail blocks off and add a little wood to make the rear end match the plans. Here are some pics of the fuel tank and its Rube Goldberg fuel line routing. I have also installed the EZ fueler and the front sheeting. I put a small piece of monokote around the fueler so that it will be eaiser to cover that area later. The servo rails are now in place and they seem to line up with the pushrods well.
No comments:
Post a Comment